rec.arts.movies.production.sound

On Feb 25, 8:44=A0pm, Hunter wrote:
> This probably doesn't help, but I usually put receivers on both
> cameras and then send wirelessly to both.
>
> I have also used XLR splitters and have not had any issues.
>
> I would be reticent to use the tape out. I reserve that as the feed
> for my R-09 (which I run whether or not the client has asked for it -
> bettersafe, right?).
>
> -H
>
> wrote:
> > > Would you use two "Y" cables to split the signal out of the 302's
> > > balanced outputs?
> > > or
> > > Build a mini TA3 unbalanced to dual XLR Balanced cable for the 302's
> > > tape output...
>
> > > is there a better way to do this?
>
> > > Thanks,
> > > S.

I've used Y cables to feed two cameras with no issues and minimal
signal loss. I also have a tape out spider cable made by Peter Engh
/, that feeds two Lectro transmitters for a
camera hop and has an 1/8th inch stereo plug for feeding the mix to a
small recorder. It can be ordered attenuated or not attentuated. It
works great!
Bernie